Right-of-Way & Fence Line Clearing in Knoxville, TN
Right-of-way and fence line clearing in Knoxville, TN is the linear corridor job on Ridge-and-Valley slopes and Cumberland foothills in Knox County: a fence line, a driveway easement, a utility ROW, or a property line cut and hauled. It is not a planned grub to a pad, not a forestry-mulch pass that leaves the root mat, not standing brush on a whole lot, not storm-downed timber, and not a single-tree stump grind. We open the strip, then the stems leave. If that cut disturbs one acre of Knox County slope, TDEC CGP (the Construction General Permit) is in the scope before a machine starts down the line. If a wet-weather conveyance or wetland sits in the hollow the corridor crosses, USACE 404 keeps the haul off that ground. Call (865) 622-5131 and we walk the fence line, not a pad stake.
What we do
This page owns the linear corridor on Ridge-and-Valley slopes and Cumberland foothills in Knox County: a fence line, a driveway easement, a utility ROW, or a property line, cut and hauled. A planned grub to a pad lives on residential lot clearing. A mulch pass that leaves the root mat lives on forestry mulching. Standing undergrowth you meant to cut and haul off a whole lot lives on brush removal. Timber already on the ground after a storm lives on storm debris cleanup. One standing tree and its stump grind lives on tree and stump removal. This URL is the strip, not the acre.
A Knox County fence line is walked pin to pin, not mowed as a rectangle. We stay inside the easement. Cedar, locust, and woven wire on a Ridge-and-Valley bench get a different cut than a driveway easement that has grown shut with privet on a Cumberland foothill grade. The machine does not swing wide into the neighbor’s trees to make the pass easier. Stems leave the corridor. Chips are not a substitute for haul-off on this job.
A wet-weather conveyance or wetland in a Knox County hollow the corridor crosses can fall under USACE 404. We flag the seep, skip it, and pick the line back up on the far bench. We do not fill the conveyance to keep a fence perfectly straight. Call (865) 622-5131 before anyone blades a ditch down the property line “to get a cleaner edge.”
TDEC CGP at 1 acre is a width-times-length call on this page, not a lot-size call. A tight eight-foot fence walk of a Knox County mile often stays under that Construction General Permit line. A twenty-foot driveway easement of that same mile can file it. We measure the strip on the walk and say which side of 1 acre you are on before a machine starts down the line, not after the clay is already open.
Work toward Oak Ridge land clearing or Farragut land clearing still starts with this Knox County corridor read — those city overviews already live at their long 200 URLs; this page stays the fence-line, easement, and utility-ROW job on Ridge-and-Valley and Cumberland foothill grade.
Tennessee 811 is called before we cut a utility easement on this Knox County grade. A marked gas or telecom line in the strip is not a free swing. We hold the width the easement actually grants, not the width a bush hog would like. An acre-scale commercial tract is a different URL and a different TDEC CGP conversation; a linear corridor that happens to sit on a larger tract is still priced and permitted as the strip.
Why Land Clearing Knoxville
- Linear corridor, not a planned grub. On Ridge-and-Valley slopes and Cumberland foothills we cut a fence line, a driveway easement, a utility ROW, or a property line and haul the stems. Opening a pad is a different URL and a different permit conversation.
- USACE 404 stays off the haul. A Knox County hollow the corridor crosses can be a USACE 404 wetland. We skip the seep. We do not make a new channel by blading spoils down the line to keep a fence straight.
- TDEC CGP at 1 acre named on the walk. Corridor width times length is the Construction General Permit call on this page. A tight Knox County fence walk often stays under 1 acre; a wide mile of easement can file it. We measure before a machine starts.
- Cut and hauled, root mat not left as the product. A forestry-mulch pass that leaves chips and roots in the strip is a different job. On this Knox County corridor the stems leave so you can fence, drive, or maintain the line.
- Written scope after we see the corridor. Width, Ridge-and-Valley versus Cumberland foothill access, whether USACE 404 blocks a hollow, and whether TDEC CGP at 1 acre is in play all come from the walk. Call (865) 622-5131.
What Right-of-Way & Fence Line Clearing costs in Knoxville
Right-of-way and fence-line clearing on a Knox County Ridge-and-Valley or Cumberland foothill corridor typically runs $2,000–$15,000 per mile. Corridor width, terrain, and disposal method move that number.
Prices on this page are estimates from previous work. We cannot quote an exact price. The actual cost can be lower or higher depending on the job. The person who knows is the professional who will do the work. You get a written quote after we see the house.
An eight-foot fence walk on a Ridge-and-Valley bench is not the same day as a thirty-foot driveway easement that drops into a Cumberland foothill hollow. Haul-off of locust and cedar off a Knox County corridor costs more than a chip-in-place pass, which this page is not. A USACE 404 wetland the line has to skip adds length around the seep instead of through it.
If the cut actually hits 1 acre of disturbed Knox County slope, TDEC CGP filing sits in the scope; a tight fence line that stays under that line does not. See our Knoxville land clearing cost page for typical ranges by service. Firm pricing follows an on-site walk of the corridor. Call (865) 622-5131.
How to get started
Fastest path: call (865) 622-5131. We take the Knox County address, whether the corridor sits on Ridge-and-Valley slopes or Cumberland foothills, whether it is a fence line, a driveway easement, a utility ROW, or a property line, and whether a wet-weather conveyance runs across the strip so we can flag USACE 404 before anyone arrives.
Have a sense of the width you actually need before we arrive. On a Ridge-and-Valley bench that number is also the TDEC CGP at 1 acre call. Tennessee 811 is called before we cut a utility easement. There is no form on this page; the written quote follows the walk of the corridor, not a satellite screenshot.
Related services
This page is the linear corridor on Knox County Ridge-and-Valley and Cumberland foothill slopes — fence line, driveway easement, utility ROW, property line; cut and hauled; USACE 404 off the haul; TDEC CGP at 1 acre if the strip opens that much ground. A planned grub to a pad lives on residential lot clearing; a mulch pass that leaves the root mat lives on forestry mulching; standing undergrowth on a whole lot lives on brush removal; storm-downed timber lives on storm debris cleanup; one tree and a stump grind lives on tree and stump removal.
Frequently asked questions
How much does Right-of-Way & Fence Line Clearing cost in Knoxville?
Cost on this page is a Knox County per-mile corridor number: width of the fence line or easement, Ridge-and-Valley terrain, haul-off, and whether a USACE 404 wetland forces a skip. Cumberland foothill access that is too steep to run a machine in the strip changes the day. If the cut disturbs 1 acre, TDEC CGP filing sits in the scope. See the cost page for typical ranges. You get a written quote after we see the house. Call (865) 622-5131.
How long does Right-of-Way & Fence Line Clearing in Knoxville, TN take?
A Knox County fence line of a few hundred feet on a Ridge-and-Valley bench is often a day of cut and haul. A mile of driveway easement that drops into a Cumberland foothill hollow, or a corridor that has to skip a USACE 404 wetland, runs longer. If TDEC CGP at 1 acre is in play, the calendar follows that permit — not a lot-grub one-and-done.
Do I need a permit?
Two desks, plus a locates call. USACE 404 wetlands in a Knox County hollow the corridor crosses get flagged before a machine starts down the line — we skip the seep rather than fill it to keep the fence straight. TDEC CGP at 1 acre of disturbance is the Construction General Permit; a tight fence walk often stays under that line, a wide mile of easement can file it. Tennessee 811 is called before we cut a utility easement. We say which desk is in play on the walk.
Are you licensed and insured?
Yes. The crew that cuts and hauls a Knox County Ridge-and-Valley or Cumberland foothill corridor — fence line, driveway easement, utility ROW, property line — is licensed and insured, and the walk includes the USACE 404 flag, the TDEC CGP at 1 acre call, and Tennessee 811 before a saw starts down the line. Call (865) 622-5131.
Do you handle urgent situations?
A fence already down on a Knox County property line still starts with the same walk: flag USACE 404 wetlands the corridor crosses, decide width, then cut. Timber already on the ground after a Ridge-and-Valley storm is a different job. Call (865) 622-5131 and we give an honest window for Knox County, not a same-hour promise we cannot keep.
Ready for Right-of-Way & Fence Line Clearing in Knoxville, TN?
Right-of-way and fence line clearing on Knox County Ridge-and-Valley slopes and Cumberland foothills starts with a walk of the corridor — fence line, driveway easement, utility ROW, or property line; USACE 404 in the hollow; TDEC CGP at 1 acre if the strip opens that much ground. Free on-site quote. No obligation. Call (865) 622-5131.